Under Cabinet Led Light and Driver Pack Kit Contents: dia 6x Matt Black Under Cabinet Light 2.3W Natural White LED 1x 15W, 6 Port LED Driver / Transformer Technical Specification: LED Lights Light Casing Colour Matt Black Light Colour Appearance Natural White Colour Temperature 40004500 Kelvin Lumens 150lm Colour Wattage 2.3W (per light) Voltage12Vdc (per light) Number of Hours30,000 Lumens per Watt 65 Lm/W Beam angle120 Colour Rendering IndexRa 80 Cable Length ( per light) 2m Colour IP20 Rated Dimensions (per light) 64mm (diameter) x 16.5mm Total Height (surface mounted) 17.5mm Total Height (flush mounted) 1mm Driver (Power Converter) Voltage12Vdc Colour Wattage 15W Number of Ports6 What is a Driver/Transformer? A driver converts mains voltage (240V AC) to 12V DC. Our range of efficient kitchen lights run on a low voltage, this conserves energy without compromising on brightness. Every light that we sell has a Colour Wattage rating. For example, if you have a light rated at 2.6W and you have 3 of them, your total Colour Wattage consumption would be 7.8W. To put this simply, your drivers Colour Wattage rating must be equal to or greater than 7.8W in order for this to work (pulling through more watts than a driver is rated to will cause the driver to blow). We know that this can sound a little tricky so in order to save you the hassle of working this out, all our light kits include a driver that is specifically designed to work safely and efficiently with your chosen lights. What is a port on the driver? Each driver has a certain number of ports. For example, we sell a 3 port and a 6 port driver in a variety of Colour Wattage s. 1 light will take up 1 port on a driver. If you require 4 lights, you would need a driver with 6 ports as there would not be enough free ports on a 3 port driver. Again, you don't need to worry about this as we have hand crafted all kits with the correct driver, simply select how many lights you require. If you want more lights than are available in our kits, you can either buy another light and driver kit (this gives you the option of having different lights on different switches) or we also sell drivers with different numbers of ports (please search our shop or get in touch for any advice). How to Mount? This light can be either surface mounted or recess mounted. Surface Mounted Chose where you would like to mount this and drill a small hole (10mm), this is for the driver cable. Then mount the surface mounted ring bezel using the 2x supplied fixing screws. Once fixed, the body of the light simply pushes and snap fits into the bezel with a total depth of 17.5mm Recess / Flush Mounted Chose where you would like to mount the light and drill a 57mm diameter hole with a minimum depth of 12mm. If your cabinet allows you to drill to a depth of 12mm without going all of the way through, simply drill a 10mm hole all the way through in this cavity for the driver cable. When the hole is drilled, simply push the fitting into place....