General description Our 16MM Wire Rope Grips are manufactured from mild steel with a galvanised coating for corrosion resistance. They are designed for use in rigging setups on boats or similar applications on land. These grips are ideal for creating loops of wire in a rope assembly or for temporary joins. Technical specifications Product Code: SFCOMG16 Product Weight: 1.75 KG Quantity: 10 Finish: Galvanised Dimensions: A: 32 MM B: 16 MM C: 25 MM D: 12 MM E: 64 MM F: 26 MM G: 50 MM Installation Prior to fitting, grease the threads on the nuts and bolts. Ensure spacing between grips is at least 6 times the diameter of the rope. Orient the grip correctly, placing the 'u' bolt on the unloaded end of the rope. Tighten each nut evenly and in turn to achieve the recommended torque settings. Leave unused for 24 hours and check torque setting again, re-tightening if necessary. After the first application of the load, re-check torque setting and re-tighten if necessary. Periodically check the