
Application Perfect for all 4 or 6 CYL, 1.5L- 2.5L engines *Note: 1. Please confirm that there is enough space in your car to install this turbo before purchasing. 2. Lack of oil will cause the turbocharger shaft play and damage, please adjust the oil pressure and ensure that the turbocharger is fully lubricated. 3. Make sure actuator pressure lowering than 25psi, Oil pressure lowering than 2 bar. Specification Exhaust Inlet Flange: T3 4 bolt Flange Exhaust Outlet Flange: V-Band Flange (ID/OD: 2.5"/3.1") Turbine Side: Turbine Trim: 74.2 Turbine A/R: 0.63 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust outlet : 79mm Turbine exhaust inlet: 44.7mm(length)/85.8mm(width) Compressor Side: Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Compressor outlet:78 mm Compressor inlet:51.5 mm Oil Inlet: M12*1.25 & 2*M8*1.25 Oil Outlet: 2*M8*1.25 Bearing: Journal Bearing Cooling Type: Oil Cooled Wastegate:With Wastegate Thrust Bearings: