5m connection cable. Protection class: IP68, max. 250V 50/60Hz Max. switching angle: +/- 50°, max. Operating temperature 50°C If your pump has a power greater than 1.1 kW: You will need to place a conventional corresponding relay or power contactor upstream. This hollow float is lifted and pushed upwards by the rising liquid until, at an angle of 50° to the horizontal, a switch-on is triggered. The float can be attached by screwing it to the side or, if you have an open tank, by placing it from above on the liquid. The switching point can be set very precisely thanks to the ballast weight with which it is equipped as standard. Suitable for almost any pump. The float is ideal for monitoring the fill level of any liquid that does not attack its material, regardless of the degree of contamination. You can use this float as a full or empty indicator, to control pumps or valves or other alarm signals.