Rechargeable LED Cabinet Strip Light Automatic On/Off PIR Sensor Whats in the box? 2x 305mm Sensor LED Light 4x Magnetic Fixing Brackets 4x Fixing Screws 4x Double Sided 3M Adhesive Pads 2x USB-A to USB-C Charging Cable Technical Specification: Length: 305mm Material: Aluminium and Polycarbonate Lithium Battery Voltage: 5V Colour Wattage : 1.5W Charging: USB-C Cable Power Supply: 1100mAH Colour Temperature: 4000k Light Colour: Natural White PIR Range: 1m Detection Angle: 120 degrees Charge Time: 2.5 Hours Dimensions (LxWxH): 305mm x 39.8mm x 9.8mm Key Features: Slim Profile These fittings have a depth of 9.8mm, so you can be confident that a sleek and modern fitting will be visible whenever you open your cabinet doors. As they are surface mounted, they are incredibly easy to install, no cutting or recessing required. Built-in PIR Sensor The built in PIR sensor will detect movement (e.g., the opening of the cabinet door) and turn on the light accordingly. After no movement is detected for 30 seconds, the light will automatically turn off. Two Lighting Modes Using the power button, you can set the light to two different light settings. A long press will turn the light on or off. A short dia press of the button will put the light into auto-sensing mode. LED Technology Each light features a diffused cover that mimics the appearance of a halogen cabinet with no visible LED points or spots. This ensures that your unit interiors are adequately and evenly lit. Easy Installation The magnetic brackets for this light have two mounting options, one of which is completely tool-less and makes use of the double-sided adhesive strips that are provided. If you would prefer to screw the magnetic brackets to the inside ceiling of the cupboard, that is also an option using the screws provided. How to Mount: Mount the two magnetic brackets in the desired location, ensuring that they are in line with the magnet locations on the back of the light. The brackets can either be screwed to the cabinet or fixed by the supplied double sided adhesive pads. There is an arrow on the back of the unit, the light should be mounted with the arrow pointing into the cabinet. Attach the light to the magnetic bracket. Check operation of light and PIR sensor. To charge, simply remove the light from the brackets and charge using the supplied USB cable. Further Information : If you are not quite sure what you need, please get in touch with your requirements and we will get back to you with a quote for a bespoke bundle ASAP. As well as these cabinet strip lights, we also stock a wide range of under and over cabinet lights, so you can be sure to find exactly what you need to dia modernise your kitchen. Product Code: s410x2