Steps can be treacherous even when clean and dry however when wet and slippery they can be especially hazardous. Our range of stair tread covers are made from high quality fibreglass they are ideal for use in high traffic areas they are manufactured to Level 3 wear resistant standards and Level 3 slip resistance and both chemical and flame resistant they are also suitable for use in wet dry oily and greasy areas. Available in a range of colours designed either to blend into your environment or to be easily visible in areas of poor light or high traffic. Installation is easy and quick and to help ensure that downtime and disruption is kept to an absolute minimum the stair coverings are available in cut lengths up to 3 metres this will not only save time but means that there is no need for additional safety precautions necessary if cutting takes place on site. Stair tread coverings can also be pre-drilled and countersunk as a further option and are also available in all black all yellow and black & white please call 0808 258 1387 for details. Test Data Pendulum Test Value (PTV) Dry 82 Wet 76 Ignitablity tested to EN ISO 9239-1: 2010 Radiant panel test for floorings tested to EN ISO 9239-1 Anti-slip tested to BS7976.2 ASTM E84 Moulded fibreglass stair tread cover with 87° angle and flat cover plate Supplied in cut lengths to fix exactly the width of stairs you need to make safe an additional cut can also be made to reduce 345mm max depth pre-cutting removes danger of creating hazardous dust in public areas Designed to withstand tough conditions indoors and outdoors Available in a range of colours Impregnated silica grit surface protects against delamination Grit surface provides excellent grip Fire and heat resistant Conforms to ASTM E84 Supplied in Black & Yellow as standard but are also available in Black Yellow and Black & White Can also be supplied drilled and countersunk in preparation to fixing please call us for details HOW TO ORDER Stair tread covers are supplied 345mm deep as standard if your steps are deep enough to accommodate this then just enter the required width of the stair tread cover in millimetres and enter this into the appropriate size required boxes below for example if your steps are 1200 wide simply enter 1200mm into the box for code ESE1025 If your steps are not deep enough to accommodate 345mm depth stair treads enter the required depth in the same box for example if your steps are 240mm deep and 1600mm wide then enter 240mm x 1600mm into the box for code ESE1027 Then enter the number of stair tread covers required in the corresponding quantity box If you are in any doubt about what you need and how to work it out or anything else please call us and we will be happy to advise you. As these products are cut to order Returns or Credits cannot be offered on these products.