Rivet adapter:Easily change your electric drill into an electric rivet Easily pull the rivets, no need to spend a lot of effort Fast and convenient·saves time and effort· and is ,Easy installation The hexagonal screw can be used after it is connected to the drill. Made of aluminum, painted on the , rust-proof, The guide can be replaced according to the size of the rivet Easy and fast operation : woodworking, stainless steel, pipes Power Source: work with the electric drill MAX RPM : 1000 RPM Min Torque Strength: 15 m Method of operation: 1. Turn on the electric drill 2. Connect the electric drill 3. Install the auxiliary handle 4. It needs to be rotated counterclockwise to before inserting the rivet 5. Put in the correct rivets 6. Pull out the rivet clockwise 7. Exit the rivet counterclockwise Note: 1. When using the rivet adapter, you need to hold the front handle to work normally. 2. Rivets above M5*20 / 3.2*20 / 2.4*20 cannot be used. 3. Stainless steel rivets cannot be used. 4. If